|
Clifford Canbus alarm system - Fully Fitted |
|
|
CIifford - 330x CanBus Alarm |
CAN-Bus Explained
CAN-Bus, developed by Robert Bosch, is essentially a communications network for vehicles, not dissimilar to an office computer network. Most modern vehicles are fitted with 2 or more CAN-Bus backbones, to which all devices, such as ABS, Engine Management Systems and sensors, are attached. The CAN-Bus relays digital control signals to all devices, obviating the need to have every switch or control hard wired to its corresponding device via expensive wiring looms. Every device is simply attached to the CAN-Bus and power. The result is less wiring, weight and more efficiency in vehicle design and build complexity.
KEY PRODUCT ADVANTAGES
CANBUS allows the Clifford 330x to communicate with the vehicle via high speed digital data, through a twisted pair, which ensures a robust connection with minimal wiring connections to the vehicle.
Connection to the CANBUS eliminates the need for many of the analog necessary in traditional, hard-wired, security systems cutting the installation time, in many cases, down by as much as 50%.
CANBUS communicates with most of the electronic security and convenience systems throughout the vehicle, so the alarm remains in-sync with the vehicle at all times.
When the vehicle is equipped with a factory security system, it works in sync with the Clifford CANBUS security system and all factory functionality is retained.
Faster installation time, increased reliability, perfect interface with OEM systems.
IDEAL FOR NEW CARs
Because they are compatible with most late model vehicles, Directed CANBUS systems are ideal for New Car Dealers.
The CANBUS interface eliminates most analog connections required by conventional security systems, so installation and set-up in most vehicles is significantly quicker and easier than a conventional hard-wired systems.
To programming the CANBUS security system to the car, you simply turn on the ignition switch after the CANBUS wires are connected and wait 5 seconds for the LED to flash. NO door lock or parking light programming is necessary.
Horn Honk Output can be used instead of the Siren for stealth, OEM-style installations.
Directed Brand CANBUS security systems include unbranded packaging and manuals, making them perfect for NCD applications.
FEATURES
Directed CANBUS security systems use the OEM keyless entry remote to control arm and disarm via the vehicle’s CANBUS system, communicating with the vehicle via ultra secure, high-speed digital data.*
Door, hood, trunk, and ignition protection.
Built-in Stinger® Doubleguard® Shock Sensor
Revenger® 6-tone Siren
Failsafe® Starter Kill
Superbright LED
Parking Light Flash
Horn Honk Output
AUX Output
Optional Sensor Input (MUX) Port
Side light courtesy light activation on arm/disarm
Extra which can be added to this alarm system are listed bellow |
|
Add Remote Engine Start - Only works on some models. Call for application |
|
|
The Intellistart will start the engine with the push of a button from the comfort of
either home or office.
And it will do it all with unparalleled elegance, style and intuitive
one-handed operation still with the vehicle fully protected by the alarm system. Engine run time can be set to a time of your choice 0-30min.
|
Add Extra Sensors - For Maximum Protection |
|
|
Glass Tampering Sensor
Enhance the security of any install with an optional audio sensor, which detects tampering and breaking of the vehicle’s glass using a microphone and a microprocessor, which analyzes the frequency, intensity and timing of intrusion sounds to eliminate false alarms.
|
Tilt Sensor
Detects even minor lifting or rolling of the vehicle without any of the false alarms common to all other tilt and motion sensors. Advanced design allows maximum stability in extreme conditions. Motion can be turned off for tilt only sensing. A must for vehicles with upgraded wheels and tires. Automatically self-adjusting.
|
Dual Proximity Sensor
This digital signal processing (DSP) radar sensor's outer perimeter warning zone provides an invisible shield up to a foot outside the closed windows and convertible top. The interior zone instantly blasts the full alarm if someone leans into the passenger compartment. Especially recommended for convertibles and other soft-sided or open vehicles. |
Vehicle Application List |
|
|
Uk Fitting service for Alarms and Car Audio |
|
|
|
|
Remote Engine Starting |
Suitable for manual and automatic gearboxes, Remote engine start allows you to start the car before you get in. In the summer you can use remote start to cool the car down via its air conditioning and in the winter, use it to warm both the engine and interior. Just the touch of a button starts the engine, but leaves the doors still locked and the alarm still on. |
|
|
|
|
|
Dual Shock Sensor |
The most effective protection against shock/impact. Uses patented electromagnetic technology to eliminate mechanical parts. Two outputs are provided. The first offers a Warn Away® response on light impact and the second instantly triggers the alarm on hard impact. Draws less than 1mA. Includes the plug-in harness for all alarms with the standard 4 pin sensor input plug. Plug may be cut off harness for non-plug-in applications. This sensor is compatible with Clifford Viper, Hornet and Avital Alarms. |
|
|
|
|
|
Digital Dual Zone Proximity Sensor |
This digital signal processing (DSP) radar sensor's outer perimeter warning zone provides an invisible shield up to a foot outside the closed windows and convertible top. The interior zone instantly blasts the full alarm if someone leans into the passenger compartment. Especially recommended for convertibles and other soft-sided or open vehicles. |
|
|
|
|
|
Audio Glass Break Sensor |
Enhance the security of any install with an optional audio sensor, which detects tampering and breaking of the vehicle’s glass using a microphone and a microprocessor, which analyzes the frequency, intensity and timing of intrusion sounds to eliminate false alarms. |
|
|
|
|
|
Ultrasonic Sensor |
Interior Movement Sensor
The Ultrasonic Sensor is used to provide coverage of a vehicle’s interior cabin area. The sensor detects movement inside the vehicle by sensing air disturbance. They should trigger the alarm if a thief has gained access to the interior of your vehicle. |
|
|
|
|
|
Digital Tilt Motion Sensor |
Detects even minor lifting or rolling of the vehicle without any of the false alarms common to all other tilt and motion sensors. Advanced design allows maximum stability in extreme conditions. Motion can be turned off for tilt only sensing. A must for vehicles with upgraded wheels and tires. Automatically self-adjusting. |
|
|
|
|
|
Viper Electro-Luminescent Indicator |
The optional brilliant blinking “E-L Badge” from Viper/Clifford calls attention to itself (especially at night) and conveys a powerful message to would-be car thieves: “This vehicle is protected by Viper,Clifford – better leave it alone and try to steal someone else’s car instead!” |
|
|
|
|
|
Anti-Carjacking and Vehicle Self Recovery System |
BlackJax is Clifford's unique anti-carjacking response system that puts personal safety first while using innovative advancements to ensure that users can recover the vehicle themselves. If an armed car thief approaches - whether at a stop light or in a parking lot (where most carjackings occur) - immediately turn over the keys and remote and let Clifford technology take over.Fully automatic: No buttons or transmitters to push when a gun is involved. Just get away from the vehicle. Quick response: BlackJax allows the criminal to drive away a safe distance. Then, a few seconds later, BlackJax blares the siren and flashes the lights to alert other drivers and witnesses. It then pulses down the ignition system to safely force the vehicle to slow to a complete stop. Siren blaring and lights flashing, unable to restart the engine, the carjacker has no choice but to abandon the vehicl |
|
|
|
|
|
SmartWindows |
Remote Power Window Control
More Power to Power Windows. Open, close and vent the car's power windows using the G5 security system remote control. SmartWindows also adds extra features inside the vehicle: one tap fully open, one tap fully closed. Tap the switch during roll-up and roll-down to instantly stop the window. Vent opening is selectable via the CliffNet Wizard, and can be vented repeatedly after remote arming. The SmartWindows Safety Stop feature halts window movement if there is an obstruction. |
|
|
|
|
|
Voice module |
Add pre-programmed messages in either English or Japanese to your security system as an adjunct to the siren, including Viper specific messages (i.e. “Viper armed!”) Users can also record custom messages. Voice modules are also effective when used to generate Warn Away messages in conjunction with an optional 508D Radar sensor. The 516L can also be used as a P.A. system. |
|
|
|
|
|
Immobiliser Bypass module for remote start |
This unique device is designed to temporarily bypass most transponder type immobiliser systems when remote starting. The system works by using one of your spare keys to transmit the uniquely coded signal to the receiver coil in the key cylinder.
The key is placed inside the bypass module which is then located in a secure place under the dashboard. A lead then runs from this and loops around the ignition barrel.
The coded signal identifies to the vehicles computer that a valid key is present and thereby enabling remote starting. The unit will only operate as a bypass when the vehicle has been remote started. |
|
|
|
|
|
G5 cliffnet wizard |
CliffNet Wizard version 2.2. CliffNet Wizard gives you real-time control of your G5 system and G4 / G5 accessories via your Windows-based PC.
One of the coolest things about Clifford's G5 technology is the ability to plug your Windows PC into the system/accessory chain and run the CliffNet Wizard. CliffNet Wizard allows you to customize and control your Clifford G5 system and accessories with point-and-click ease. It even adds features, such as selection from among 15 different Personalized Siren Sounds, that aren't available through the system's standard PlainView 2 code-protected programming. |
|
|
|
|
|
Boot pop |
Every one of our alarm system offers a “Power Trunk/Channel 2” output, but not every vehicle has a powered trunk release that can be operated by this ouput. This actuator can be add to Power Trunk capability to your trunk release mechanism, allowing your alarm system to pop the trunk with the push of a button. |
|
|
|
|
|
Smart siren |
The Most Advanced and Dependable G5 Siren
Thieves' Worst Enemy. The world's most advanced and dependable siren for G5 systems. Its built-in battery allows this siren to keep on wailing even if the wires are cut! And its G5 Digital ComLink will detect wire tampering that thieves use to bypass other battery-backed sirens. Its smart charging system won't drain your car battery like other sirens of this type. It will even warn you if the internal battery charge is very low. No override keys are needed like other such sirens. Provides Personalized Siren Sounds even on Clifford G5 security systems lacking that feature (selecting from among 15 different sounds via CliffNet Wizard.) |
|
|
|
|
|
Window Automation System |
Roll your windows up automatically with the push of a button on your remote using the optional window closure module. The Remote Control Window Automation System controls the operation of two windows. The module can automatically roll up two power windows when a security system is armed. |
|
|
|
|
|
2-Way Garage Door Interface |
Use the powerful alarm remote on your keychain to open and close your garage door using this optional Interface, and take advantage of your system’s high level of encryption to keep “Hot Prowl” criminals wielding illegal code-grabber devices out of your garage! |
|
|
|
|
|
|
|